PEFS-PL80S-11
1 input 1 output, 80V, 15A/20APEFS-PL80S-21
1 input 2 output, 80V, 15A/20APEFS-PL120S-11
1 input 1 output, 120V, 20APEFS-PL120S-21
1 input 2 output, 120V, 20AControl Box
60panels/180panels/480panelsPEDS150H Series 63A
Hole Mounting Series, Dinrail Board Series, Panel Mounting SeriesPEDS150H Series 50A
Hole Mounting Series, Dinrail Board Series, Panel Mounting SeriesPEDS Series 1500V, 16A~32A
Hole Mounting Series, Dinrail Board Series, Panel Mounting Series, Enclosure SeriesPEDS Series 1500V, 40A~55A
Hole Mounting Series, Dinrail Board Series, Panel Mounting Series, Enclosure SeriesPEAS Series 20A~40A
Panel Mounting Series, Dinrail Board Series, Door Clutch Series, Enclosure SeriesPEAS Series 63A~80A
Panel Mounting Series, Dinrail Board Series, Door Clutch Series, Enclosure SeriesPEAS-N Series 16A~100A
Panel Mounting Series, Dinrail Board Series, Door Clutch Series, Enclosure SeriesPEBS-H Series 1000V, 63A
250V/500V/750V/1000V, 10A~63A, 4PPEBS-H Series 1000V, 125A
250V/500V/750V/1000V, 80A~125A, 4PPEBS-H Series Weatherproof Enclosure
PEBS-L Series 160V, 63A
80V/160V, 10A~63A, 2PPEBS-L Series 160V, 125A
80V/160V, 80A~125A, 2PPEBS-L Series Weatherproof Enclosure
PEJB-1-1
1 input 1 outputPEJB-2-1
2 input 1 outputPEJB-3-1
3 input 1 outputPEJB-2-2
2 input 2 outputPEJB-4-2
4 input 2 outputPEJB-6-2
6 input 2 outputPEJDB-1-1/S3
1 input 1 output,Single-phase, 3kAPEJDB-2-2/S6
2 input 2 output, Single-phase, 6kAPEJDB-2-2/T10
2 input 2 output, 3-phase, 10kAPEJDB-2-2/T20
2 input 2 output, 3-phase, 20kAPEM1-32
Rated breaking capacity 4.5kA, 6A~32APEM1-63
Rated breaking capacity 6kA, 1A~63APEM2-63
Rated breaking capacity 10kA, 1A~63AAn inverter is used to convert electricity and control the charge and discharge of energy storage components and the supply and demand balance of local loads. According to the safety requirements, between the photovoltaic module and the inverter, the installation of photovoltaic rapid shutdown equipment, can quickly cut off the DC high voltage between the modules and the module and the inverter; In the vicinity of the inverter, need to install (internal/external) isolation switch protection to quickly shut down the inverter; The energy storage system (battery pack) can convert the excess AC power into DC power for storage, peak cutting and valley filling, and then convert it into AC power when the power is insufficient. The charging and discharging process needs protection. The non-polarity miniature circuit breaker can meet the bi-directional protection of the line.