• Manual Changeover Switch (PECS Series)
  • Manual Changeover Switch (PECS Series)
Manual Changeover Switch (PECS Series)

PECS-63

Manual Changeover Switch (PECS Series)

PECS-40

Manual Changeover Switch (PECS Series)

The PROJOY PECS Series manual changeover switch provides a simple and reliable solution for switching between two AC power sources. Its purely mechanical design features a mechanical interlock and three-position I-0-II operation, allowing users to manually select a power source or disconnect the load. With a flame-retardant housing and DIN rail mounting, the PECS Series is ideal for routine power source switching and maintenance applications in residential and commercial electrical systems.

Key Features of PECS Series Manual Changeover Switch

Mechanical Interlock

Prevents simultaneous connection of two power sources for safe and reliable switching.

Three-Position I-0-II Operation

Allows manual selection between two power sources, with a clearly defined OFF position for isolation.

Purely Mechanical Design

Operates without electronic controllers, reducing complexity and maintenance requirements.

Flame-Retardant PA66 Housing

Provides durability and enhanced safety in electrical installations.

PC Class Short-Circuit Withstand

Withstands short-time fault currents with appropriate upstream protection.

Optional Auxiliary Contact

Enables signal feedback for remote monitoring.

DIN Rail Mounting

Supports convenient installation on standard 35 mm DIN rails (EN 60715).

Wide Temperature Range

Designed for reliable operation from -35°C to +70°C.

How Does a Manual Changeover Switch Work

The PROJOY PECS Series manual changeover switch uses a three-position I-0-II mechanism to manually switch between two power sources. A built-in mechanical interlock prevents both sources from being connected simultaneously, ensuring safe power transfer.
I

Position I – Source 1

Connects the load to the primary power source (e.g., grid).
0

Position 0 – OFF

Disconnects the load from both power sources for isolation and maintenance.
II

Position II – Source 2

Connects the load to the alternative power source (e.g., inverter or generator).

PECS Series Manual Changeover Switch Technical Specifications

Parameter PECS-40 PECS-63 PECS-125
Rated Current 16/25/32/40A 16/25/32/40/63A 63/80/100/125A
Rated Voltage AC 230V/400V (1P); AC 400V (2P/3P/4P)
Frequency 50/60 Hz
Poles 1P / 2P / 3P / 4P
Utilization Category AC-22A
Standard IEC 60947-3
Mechanical Life 8,500 cycles
Electrical Life 1,500 cycles
Mounting DIN rail EN60715 (35mm)
Protection Rating IP20
Operating Temperature -35°C to +70°C
Terminal/Cable Size 10 mm² 16 mm² 50 mm²

Applications of Manual Changeover Switch

01. Residential Solar & Energy Storage Systems

Manual switching between grid power and compatible inverter or energy storage outputs in residential power systems.

02. Small Commercial Power Distribution

Reliable power source selection for shops, offices, and small commercial facilities where manual switching is sufficient.

03. Construction Site Temporary Power

Manual changeover between available power sources for temporary electrical installations at construction sites.

04. Electrical Maintenance & Isolation

Provides a clearly defined OFF position for isolating electrical circuits during routine maintenance and servicing.

Frequently Asked Questions

What is a manual changeover switch used for?

A manual changeover switch allows users to switch between two power sources, such as the grid and an inverter or generator. It is commonly used in residential, commercial, and temporary power systems where manual switching is sufficient.

What is the difference between a manual changeover switch and an automatic transfer switch ?

A manual changeover switch requires an operator to physically switch between power sources, while an ATS automatically detects power conditions and transfers the load. Manual switches are suitable for non-critical applications where immediate power restoration is not required.

How do I choose the right PECS manual changeover switch?

The PECS Series offers 16-125A ratings with 1-4P configurations. Selection depends on the system voltage, load current, number of poles, and application requirements.

Can the PECS Series be used in solar and energy storage systems?

Yes. The PECS Series can be used for manual switching between compatible AC power sources, such as the utility grid and inverter outputs.

Does the PECS manual changeover switch provide short-circuit protection?

The PECS Series is a manual changeover switch designed for power source switching and isolation. It does not provide built-in short-circuit or overload protection and requires appropriate external protective devices.

Download

Certificate User Manual

CE Certificate_PECS

1021.3KB

Manual & AutomaticTransfer Switches

3.4MB

SEARCH

%{tishi_zhanwei}%

Fill out the form to get product information

I Would Like Some More Details. Product Requirements: Delivery Time: Payment:
Security verification
Submit